Alcohol Distiller Bubble Plate Reflux Column 2" Tri Clamp Ends, Fits Beer Kegs

Description: Clamps right to US Beer Kegs!The Column Includes4 section bubble plate column as pictured (Note: glass sections attach to each other with a silicone gasket, for a better seal and lower cost)Spare borosilicate glass section included, we also carry all the spare parts if ever needed2 spare silicone gaskets4 pure copper plates4 pure copper downcomers Product DetailsLight assembly required. No soldering needed. Super fun to use and easy to clean.100% Food Grade 304 Stainless Steel and T2 lead free food grade copper and silicone.It's a highly efficient bubble plate column.It can be used to distill ethanol (fuel alcohol), spirits (whiskey, Bourbon, vodka, gin, tequila, "moonshine," and more), and essential oils.Compatible with electric hot plates.Compatible with propane turkey fryers.Compatible with anything with 2 inch tri clampApproximately 20 inches tall.See this link for a complete glass bubble plate reflux still column with copper bubble plates. Alcohol Distiller Bubble Plate Reflux Column & Condenser, Fits 2" Tri Clamps KegIdeal to fit any boilers, beer kegs that have 2" tri clamp port on top. The system is made of Durable Easy-to-clean stainless steel 304 and t2 lead free copper which is a guarantee for a lifetime of use. The glass design will allow you to view the entire distillation processes from the start to the end. This will definitely be an eye catcher in your distillery. So fun to watch! 2" tri clamp bottom flanges are made to clamp to any 2" tri clamp opening, or beer keg! We also sell an adapter to make it fit the top of the Robobrew, Grainfather, Turboboiler, Mash and Boil or any lid with a 17mm hole. Weld-less 2" Tri Clamp Bulkhead - Fits Robobrew Brewzilla Turbo 500 Digiboil etc 2" Tri Clamps sold separately here: 2" Tri Clamp 304 Stainless Fits Sankey Keg, Moonshine Distilling Columns 2 inch 2" Stainless Tri Clamp Dephlegmator sold here: 2" Tri Clamp Dephlegmator Condenser for Moonshine Reflux Still Column w 1/2" npt 2" Tri Clamp gaskets sold separately here: 2 PACK 2" Silicone Tri Clamp GASKET For Distilling Column, Sight Glass Moonshine and 2 PACK 2" Silicone Tri Clamp BEER KEG GASKET For Distilling Column Moonshine 2" Tri Clamp sight glass sections: Stainless 2” Sight Glass Tri Clamp Brewing Distilling Pump Or Column Window 2" Tri Clamp Extension tube spool sections: Stainless 2" Tri-Clamp Extension Tube - 12" long/tall Tower Still Spool Filter NOTE: Glass sections connect with special slotted silicone gaskets now, much better and safer than the stainless rings in the first version from 5 years ago which were expensive and cracking the glass. Keywords: alcohol distiller, vodka still, whiskey still, moonshine still，distillation column，distillation equipment，home alcohol distiller，flute still，copper still. Assembly Instructions: Items needed for assembling the four 2 inch glass column with copper bubble plates:4* glasses2* stainless steel flanges4*copper bubble downcomers with caps4*glass gaskets4*stainless steel rods with nuts Step 1Put the copper bubble caps on the copper downcomers to get them connected together, and then put the complete copper bubble plates into the glass gaskets, the final part of this step is to put them on one of the flanges, as following: see picture for "step 1" in images aboveStep 2 Put one of the glasses on the glass gasket that is put on the flange, then put the complete copper bubble plates into the glass gasket again and put them on the top of the first glass, as following: see picture for step 2 in images above.Step 3Repeat the Step 2( put the complete copper bubble plates into the glass gasket again and put them on the top of the next glass) till we use all the glasses. As following: See picture for Step 3 in images above.Step 4Put the flat gasket on the top of the final glass, and then put the rest flange on the top of the flat gasket. Step 5By using all the rods and nuts to get the column tight. That’s all.

Price: 140 USD

Location: Lansing, Michigan

End Time: 2023-11-29T16:18:07.000Z

Shipping Cost: N/A USD