3 in 1 Digital Oscilloscope Meter Handheld Automotive Diagnostic with USB 50MHz

Description: General Introduction This oscilloscope is designed according to the research, production, debugging and repair requirements of many electronic engineers. In contrast to traditional oscilloscope is equipped with a built-in lithium battery and can work without external power supply, so it is convenient for carrying, especially for field application. It has three trigger modes-Auto, Normal and Single. You can lock and save the waveform of a non-periodical signal which a traditional oscilloscope can not capture. The oscilloscope features compactness, beautiful appearance and friendly interfaces. It can quickly and accurately detect the faults of the circuit under test and can serve as an electronic engineer's assistant, and will provide great convenience for you in work. Need Your Attention Please In order to obey the Shipping Security Rule and in order to passing the customs security check. We had disconnect the plug of battery to make it keep insulated. You need to take off the battery cover on the back of the oscilloscope, then plug in the battery before first-use. Functions Oscilloscopes function Multimeter function Waveform Output function Characteristics 320 × 240 pixels high-resolution color LCD, which has a higher information displaying capacity and a better displaying effect. The oscilloscope is equipped with a high-capacity lithium battery, and supports multi placement methods, for example, it can be placed on the tilt stand, gripped by one hand, or hung. It is convenient for applications in various fields. Waveform and waveform parameter(s) can be displayed simultaneously on the screen, you can measure and display any three of the ten parameters- peak to peak value, maximum value, minimum value, average value, mean square root, frequency, period, duty cycle, rise time and fall time. Auto set function sets time base and vertical range automatically{C}{C}. Selectable language ( Chinese or English ), easy to operate. Compactness and light weight ( about 700g ) Specification Performance of Oscilloscope Bandwidth (-3dB) 50MHz Sampling Rate Max. real time sampling rate 200MSa/s Channel 1 Coupling AC, DC Rise Time ≤ 7.6ns Input Impedance 1MΩ， ≤ 20pF Max Input Voltage 1x CAT III 300 VAC 10x, 100x CAT III 600 VAC Vertical Resolution 8 bit Vertical Sensitivity 10mV/div - 5V/div Horizontal Resolution 2ns/div Horizontal Sensitivity 2ns – 5s Record Length 4K/channel Memory 6 memory locations Trigger Mode Auto, Normal, Single Trigger Type Edge trigger Basic Performance Screen 320×240 pixels (RGB), with LED backlight Communication USB, PC software Battery 3.7V lithium polymer battery, 4Ah Adapter Input Voltage: 100Vac - 240Vac Output: 5Vdc ± 10%, 2000mA Operating Environment Temperature: 0℃ - 40℃ Humidity: ≤ 75% Storage Environment Temperature: -10℃ - 50℃ Humidity: ≤ 85% Operating Altitude 0 - 2000m Size 218mm × 118mm × 50mm ( including holster ) Weight 700g（main body only） Performance of multimeter Display 6000 counts　 Input Max. Input Voltage: 600 Vrms CAT II, 300 Vrms CAT III　 Continuity Test Beeps at < 25Ω, in 600Ω range Diode Test If the voltage drop of the diode under test is more than 2V or if the test circuit is open, the display will show " OL ". If the voltage drop is less than 0.25V, the built-in buzzer will sound. Capacitance Measurement 6.000nF - 6mF Resistance Measurement 600.0Ω - 60.00MΩ Voltage Measurement 6.000V - 600V Waveform output performance Amplitude Output amplitude is adjustable. Output amplitude range: 0 - 2.5V Output amplitude accuracy: ± 2% for amplitudes < 2V ± 5% for amplitudes > 2V Frequency There is no frequency setup for dc output. Output frequency range: 26Hz - 50kHz Output frequency accuracy: ± 2% Specification of Oscilloscope Vertical System: channel of Oscilloscope Bandwidth (-3dB) 50MHz Accuracy 10mV/div to 20 mV/div: ± 5% full scale 50mV/div to 5V/div: ± 3% full scale Vertical Offset Accuracy (DC) ±0.2 div ±2mV ±0.5% offset value Trigger Sensitivity DC to 50 MHz: 0.8 div Specification of probe Rise Time X1 < 23.3ns X10 < 7.6ns Bandwidth X1 DC - 8MHz X10 DC - 50MHz Input Impedance X10 10MΩ (not including the Scope's input resistance 1MΩ) Input Capacitance X1 46pF ( not including the Scope's input capacitance ) X10 about 15pF Specification of Multimeter Function Range Frequency,test current,or load voltage Condition:at calibration temperature±5℃, for 1 year Voltage DC Voltage 6.000V 1.0 + 8 60.00V 0.5 + 8 600.0V 0.5 + 8 AC Voltage 6.000V – 600.0V 40Hz–400Hz 1.0 + 10 400Hz–2kHz 5.0 + 10 Resistance 600.0Ω 1.0 + 5 6.000kΩ 1.0 + 5 60.00kΩ 1.0 + 5 600.0kΩ 1.0 + 5 6.000MΩ 1.0 + 5 60.00MΩ 2.0 + 10 Capacitance 6.000nF 3.0 + 8 60.00nF 3.0 + 8 600.0nF 3.0 + 8 6.000μF 3.0 + 8 60.00μF 3.0 + 8 600.0μF 3.0 + 8 6.000mF 3.0 + 8 Continuity Buzzer beeps if the resistance is less then about 25Ω. Diode Buzzer beeps if the forward voltage drop of the diode is < 0.25V. Payment1.We accept PayPal only.2.All major credit cards are accepted through secure payment processor PayPal.3.Payment must be received within 7 business days of auction closing.4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.Shipping1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.2.Items will be shipped within 1-3 business day when we received payment.3.Delivery time depends on destination and other factors;4.International buyers please note: a.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer’s responsibility. We will try our best to reduce the risk of the custom duties. b.Please check with your country's customs office to determine what these additional costs will be prior to buying.ReturnsReturns Accepted, Buyer, 30 Days, Money back or exchange (buyer's choice)1.Incoming damaged or defective when you receive, please contact us within 2 days after receiving the item.2.Replacement or refund will be proceeded once defect confirmed.3.Please be reminded when return, the items should be with original condition ( original packing, accessories, unused item…). 4.Except incoming defect, returning shipping fee is handled by buyer.1.Incoming damaged or defective when you receive, please contact us within 2 days after receiving the item.2.Replacement or refund will be proceeded once defect confirmed.3.Please be reminded when return, the items should be with original condition ( original packing, accessories, unused item…).4.Except incoming defect, returning shipping fee is handled by buyer.Contact UsPlease feel free to contact us via eBay or e-Mail if you have any question. We will reply within 24 hours in working day.

Price: 215.99 USD

Location: zhangzhou,fujian

End Time: 2025-02-06T04:53:09.000Z

Shipping Cost: 0 USD