CL3000 Clamp Probe

Description: CL3000 Clamp Probe This instrument is an AC clamp sensor designed in compliance with IEC61010-1 CAT III 600 V. It is capable of measuring AC current up to 3000 A. It is suitable for measuring the current of electrical lines, appliances power supply facilities operating on low voltages of no more than 600 V. DATASHEET Safety design in compliance with the IEC61010-1 Flexibility facilitating conductor clamping even in narrow spaces Air-core coil for weight reduction Wide measuring range: 30 A / 300 A / 3000 A Output voltage of AC 3 V at full scale The measured value can be re-read with a miltimeter capable of up to AC 3.000 V display The waveform can be observed on an oscilloscope or similar instrument using a banana plug-BNC conversion connector Measurement categories (overvoltage categories) CAT I: Secondary cable runs from a power supply transformer connected to a wall socket CAT II: Primary cable runs of power-consuming equipments from a wall socket CAT III: Primary cable runs of equipment directly connected to a distribution board and cable runs from a distribution board to wall socket CAT IV: Cable runs from an incoming line to a distribution board. Product Details BrandSANWAProduct TypeClamp MeterMpn32730 100% Original Sanwa Japan Product - USA Authorized DistributorThe measured value can be re-read with a miltimeter capable of up to AC 3.000 V displayThe waveform can be observed on an oscilloscope or similar instrument using a banana plug-BNC conversion connector

Price: 194 USD

Location: Tampa, Florida

End Time: 2024-10-19T16:21:28.000Z

Shipping Cost: 0 USD