Dental Light Cure Bracket Braces Glue Ortho Primer Bonding Resin /Etching Gel

Description: Dental Light Cure Bracket Braces Glue Ortho Primer Bonding Resin /Etching Gel Description: 100% brand new and high quality! Light Cure Adhesive (Large Kit): Ortho-Bonding primer and adhesive contains acrylate monomers. Acrylate monomers are known to produce allergic skin reactions in certain sensitive individuals. May cause eye and skin irritation. Precautions: A void eye and skin contact. Wear gloves when handing this material. Precaution: Please follow manufacturer's directions on the handing, proper use and recommendations for eye protection, when using a curing light. This system is designed to be used at room temperature (20-25°C, 68-77°F) Storage between 2-27°C/35-80°F Light Sensitive Contents: 3 x Adhesive paste Syringes (10.5g) 1 x Primer Bottle (8ml) 40 x Brushes 1 x Instruction Booklet ************************************************************************************************************************************************* Light Cure Adhesive (Small Kit) Description： Warning: Primer and adhesive contains acrylate monomers. Acrylate monomers are known to produce allergic skin reactions in certain sensitive individuals. May cause eye and skin irritation. Precautions: Avoid eye and skin contact. Wear gloves when handling this material. Precaution:Please follow manufacturer's directions on the handling, proper use and recommendations for eye protection, when using a curing light This system is designed to be used at room temperature (20-25°C, 68-77°F)。Storage between 2-27°C/35-80°F Light Sensitive Packing List: 1 x Adhesive paste Syringes(3.5g) 1 x Primer Bottle (3ml) 1 x Instruction Booklet 20 x Brushes ********************************************************************************************************************************************************* Mini No-Mix adhesive 1. This product is one kind of orthodontic direct bonding system resin with aromatic bis dimethyl acrylate resin as its main material. 2. As a new-type orthodontic direct bonding system, it is convenient to use with little waste, easy to handle independently and has a favorable clinical bonding strength. 3. It consists of primer and paste with acid etchant, spatulas and small brusher as its accessories. Preparation: Clean tooth enamel surface,eliminate tooth contamination,rinse then isolate tooth and blow-dry. Etching:Etching the enamel of the tooth with acid etchant for 50 or 60 sec. Rinse and dry with clean air. If the enamel does not have a chalky appearance, pls. repeat the process; Brushing: apply a thin layer of the primer over the etched enamel with the brusher; Packaging Detail: 1 x bottle（3ml）Primer 1 x Syringes (3.5g each)Paste 1x Syringes (2.5ml) etchant Gel 20x Brushes 1xSyringe tip STORAGE: Store at 25℃ or less in a cool and dry place and avoid direct sun exposure. Recap the syringe after use. ********************************************************************************************************************************************************* Bonding Adhesive Visible light curing is a resin adhesive for dentin enamel 5ml. Describe： This product is a one-component liquid, and its main ingredients include UDMA and other multifunctional methacrylic resins. It does not contain solvents and inorganic fillers, and is safe and harmless to the human body. The product is a light-curing adhesive material, which is clinically used for the bonding of dentin and enamel. Suitable for bonding resin materials and ceramic materials. Scope of application： Used for bonding dentine and enamel with resin and ceramic materials. Clinical operation steps: 1. Pretreatment of caries and pulp protection. 2. Use 37% phosphoric acid etchant for treatment, then clean it thoroughly with water, and dry it thoroughly with an oil-free air gun. 3. Apply a layer of adhesive evenly on the tooth surface with a small brush. 4. Make the adhesive layer even as far as possible with the wind power of the air gun. 5. Irradiate with an oral light curing light source of 300mW/c㎡ for 20 seconds to cure the adhesive. 6. Please use the composite resin filling material according to the original manufacturer's instructions, as well as the subsequent grinding and reconstruction processes. Precautions： 1. During clinical use, the lip and adjacent teeth should be well isolated and protected. Avoid contact with eyes, mucous membranes and skin. 2. Phenols, clove oil and zinc oxide can not be used as the bottom material of the first layer,because clove oil contains polymerization inhibitor "phenolic substances", which will directly affect the degree of polymerization of the adhesive. 3. During the curing operation, the distance between the surface of the light curing lamp and the adhesive should be kept below 2mm, but it should not be in contact with the material. 4. Before applying adhesives and composite resin fillings, the tooth treatment surface should avoid contamination by water and other impurities. 5. It is not suitable for pulp capping, and patients who are allergic to resin should not use it. Environment： This product is operated at room temperature. Storage Conditions： This product should be stored in a cool and dry place at 2°C~28°C, avoiding direct sunlight. Shelf Life： This product is valid for 2 years, please do not use expired product. Contraindications: Patients with a history of allergy to methacrylate resins are contraindicated. ************************************************************************************************************************************************** Acid Etching Gel 37%: Dental Etchant Gel 37% Phosphoric Acid Etching Silica Gel 5ml FEATURE： 1. Enamel and dentin etching. 2. Apply special technology to obtain ideal density of the gel. 3. Gel in blue color for better visual management. Indication: It is used for acid etching of tooth enamel and dentin before dental repair. Operation Procedure： 1. Remove surface dirt, rinse the prepared cavities, and blow dry. 2. Apply the etching agent from the tooth enamel to the entire surface of the repair, and etch for 20-40 seconds. The acid etching time of deciduous teeth and dental fluorosis can be extended appropriately according to the actual situation. 3. Rinse with clean water after acid etching, and suck out in time. 4. Use adhesives and resins for bonding repair. Picture display： FDA Statement：The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatry agencies.If so, you can bid on this item only if you are an authorized purchaser.If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Feedback Shipping 1.We will send out your orders in one day as soon as we receive your payment. 2. Delivery ways : TNT,DHL,YANWEN,EMS,USPS,CHINA POST,etc. 3. Delivery time : The good you ordered will be posted out in the second day after the payment has been made .We will inform you via email if any delay occurs due to holiday events .General shipping time is between 7-12 working days .After the shipping started , the order will be monitored and the tracking number of the item will be posted on paypal or ebay . Destination Delivery Time Working Days 7-10 10-15 15-25 25-40 >50 US Item arrived 80% 10% 8% 1% -- ASIA Item arrived 30% 40% 20% 10% -- EU Item arrived 20% 20% 50% 10% -- AU Item arrived 30% 30% 20% 20% -- Other Countries Item arrived 5% 10% 10% 60% -- Returns If the item you received is damaged or defective,Please contact us immidately.We will free exchange or refund. We will pay the return shipping costs if the product is defective or the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping charges. You can return your purchase for up to 15 days from the date of delivery. No refund will be issued if the product shows signs of use. Returned package must be in the original packaging, everything must be in new condition, No missing parts. Our guarantee does not cover accidental damage or wear of product caused by customer.Thank you very much for your understanding! Contact Us We will reply all messages within 24 business hours and we are able to give you a quick response during the duty time. If we are off duty, please kindly be patient and give us a little more time, not just leave the neutral or negative feedback without communication. Every problem will be solved ASAP if you contact us! Our working timeMonday To Friday:8:30 am --- 12:00 am1:30 pm --- 5:30 pm(Please Refer to Beijing Time.)

Price: 7.69 USD

Location: beijing

End Time: 2024-11-26T03:47:37.000Z

Shipping Cost: 0 USD