Description: Overview Price includes parts, labor and shipping back to you. I will replace the Printed Circuit Board (PCB) and upgrade the connectors in a compatible ICU you provide. I will install a brand new, redesigned PCB featuring all new modern electronic components. Once I receive your ICU, I will remove and update the OEM connectors, then professionally install them on the new PCB. The completed ICU will then be tested, and shipped all within 1 business day. Unlike salvaged or refurbished ICUs, this PCB replacement offers a fresh, reliable solution for your classic Honda. Previously I was selling complete ICUs, it became too difficult and time consuming to acquire the OEM connectors and cases. Offing this as a service for your existing ICU has eliminated that problem. If you want to hang on to your current ICU and you don’t have a bad one laying around there are often non-functional (for parts only) ICUs available for purchase on eBay. After I receive your payment I will provide the shipping address for you to send the ICU that you want me to upgrade. You must provide a compatible ICU marked 38600-SH3-A111 or 38600-SH3-A011. Quality Assurance The new PCB is assembled with AEC-qualified components (AEC-Q200, AEC-Q100, AEC-Q101) AEC qualification is the global standard for stress resistance that electronic components must meet, if they are intended for use within the automotive industry. You can buy with confidence from me, I have maintained a 100% Positive Feedback rating on eBay for over 25 years! Returns are accepted within 30 days. Compatibility and Customization The PCB is a suitable replacement for the OEM PCB in ICUs from any of the listed compatible vehicles. (USDM only, not compatible with JDM etc.) Some aftermarket modifications, such as keyless ignition, can affect compatibility. If your car has aftermarket modifications, perform this simple test: Get into the car where you intend to install the ICU, close the door, and turn the key on then turn the key all the way off. Do not remove the key from the ignition. Open the door. You should hear a series of beeps from the existing ICU, this will be four short beeps followed by a pause and that pattern will repeat once per second until you either remove the key or close the door. If your car is listed as compatible and you hear the beeps your car should be compatible. Additional Features ICUs updated with this PCB, duplicate all the functions of the OEM part and provide the following additional features: Variable Delay Intermittent Wipers (for cars with intermittent wipers) To adjust the delay: Turn the wiper switch to "Intermittent." Turn the wiper switch to "Off." Wait for the desired delay time. Turn the switch back to "Intermittent." The system will remember this delay time. If the switch is off for less than one second or more than one minute, it will reset to the default delay. This method of setting the delay lets you set the wipe frequency based on real-time rain intensity and your preferences. You simply mark the beginning and end of the interval while actually experiencing the rain or road spray, giving you a simple intuitive way to set it precisely for the current conditions. Automatic Windshield Wiper Activation when the windshield washer pump is used (if your car has the necessary wire; see details in the installation video search "MyEFVideos" on Google or Bing.) With this ICU installed activating the Windshield Washer Pump will also activate the Windshield Wipers. The wipers will wipe continuously while the windshield washer pump is pumping. They will continue to wipe for two seconds more after the pump switch is released, then it pauses for two seconds before it performs one final wipe. Key Reminder Tone Mute option. When the door is open and the key is left in the ignition the car normally alerts you that you are forgetting your key with a series of beeps. You can disable the key reminder by pressing the door open sensor button three times in rapid succession to mute the key reminder tone. You will hear one two second tone to acknowledge the command and then the beeping will stop. The key reminder is automatically re-enabled the next time you insert the key. Lights On Reminder. If the lights are on when the key is removed and the door is open this ICU provides an audible alert, so you will never again drain the battery because you didn't realize your lights were on. Common Issues Often Resolved By This Service Regular windshield wipers work but intermittent wipers do not (for cars with intermittent wipers). Brake warning light stays on unnecessarily. Front corner lights malfunctioning (either staying on or off incorrectly). Installation Plug-and-play upgrade; no modifications to your car are required. Installation normally takes less than ten minutes. No additional knobs, switches or wires necessary. See the installation video search "MyEFVideos" on Google or Bing.
Price: 159 USD
Location: Sterling, Virginia
End Time: 2025-02-13T20:21:45.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Mounting Style: Snap-On
Brand: Honda
Programming Required: No
OE/OEM Part Number: 38600-SH3-A11, 38600-SH3-A01, 38600-SH3-A111, 38600-SH3-A011, 38600-SH3-A111-M1, 38600-SH3-A011-M1
Items Included: New PCB, Upgraded Connectors, Assembly, Testing, Shipping
Features: Easy Installation
Placement on Vehicle: On the back of the fuse panel under the steering wheel