ILLUSTRATED CORVETTE BUYERS GUIDE 1953 1982 CHEVROLET STINGRAY SPLIT WINDOW

Description: ILLUSTRATED CORVETTE BUYERS GUIDE 1953 1982 CHEVROLET STINGRAY SPLIT WINDOW ILLUSTRATED CORVETTE BUYERS GUIDE 1953 1982 CHEVROLET STINGRAY SPLIT WINDOW SERIALS ENGINES DETAILS PHOTOS INTERIOR WHEELS COLORS OPTIONS IDENTIFICATION NUMBERS SOFTBOUND BOOK in ENGLISH by MICHAEL ANTONICK ------------------------- Additional Information from Internet Encyclopedia The Chevrolet Corvette is a line of American two-door, two-seater sports cars manufactured and marketed by General Motors under the Chevrolet marque since 1953. Throughout eight generations, indicated sequentially as C1 to C8, the Corvette is noted for its performance, distinctive styling, lightweight fiberglass or composite bodywork, and competitive pricing. The Corvette has had domestic mass-produced two-seater competitors fielded by American Motors, Ford, and Chrysler; it is the only one continuously produced by a United States auto manufacturer.[3] It serves as Chevrolet's halo car. Since its introduction in 1953, the two-seater has steadily moved upmarket. Initially, a relatively modest, lightweight 6cylinder convertible, subsequent introductions of V8 engines, competitive chassis innovations, and rear mid-engined layout have positioned the Corvette in the supercar class. The first three Corvette generations (19531983) employed body-on-frame construction, and since the C4 generation, introduced in 1983 as an early 1984 model, Corvettes have used GM's unibody Ybody platform.[5] All Corvettes used front mid-engine configuration for seven generations, through 2019, and transitioned to a rear mid-engined layout with the C8 generation. In 1953, GM executives accepted a suggestion by Myron Scott, then the assistant director of the Public Relations department, to name the company's new sports car after the corvette, a small, maneuverable warship.[7] The first model, a convertible, was introduced at the 1953 GM Motorama as a concept car; production models went on sale later that year. In 1963, the second generation was introduced in coupe and convertible styles. Initially manufactured in Flint, Michigan, and St. Louis, Missouri, the Corvette has been produced in Bowling Green, Kentucky, since 1981, which is also the location of the National Corvette Museum. The Corvette has become widely known as "America's Sports Car." Automotive News wrote that after being featured in the early 1960s television show Route 66, "the Corvette became synonymous with freedom and adventure," ultimately becoming both "the most successful concept car in history and the most popular sports car in history." History First generation (C1; 19531962) The first generation of Corvette was introduced late in the 1953 model year, appearing as a show car for the 1953 General Motors Motorama, January 1723 at New York's Waldorf-Astoria Hotel.[10] At the time, Chevrolet general manager Thomas H. Keating said it was six months to a year away from production readiness.[11] The car generated sufficient interest for mass production to begin on June 30, 1953. Uniquely, the original Corvette used fiberglass bodywork, its reinforcement placed by hand. This generation was often referred to as the "solid-axle" models, with independent rear suspension appearing in the next.[17] Three hundred hand-built Corvette convertibles were produced, all Polo White, for the 1953 model year. The 1954 model year vehicles could be ordered in Pennant Blue, Sportsman Red, Black, or Polo White; 3,640 were manufactured. The 1953, 1954, and 1955 model years were the only Corvettes equipped with a 235 cu in (3.9 L) version of the second-generation Blue Flame inline-six rated at 150 hp (112 kW; 152 PS). The 1955 model offered a 265 cu in (4.34 L) V8 engine as an option. The new V8 improved 060 mph (097 km/h) acceleration by 3 seconds. With a large inventory of unsold 1954 models, GM limited production to 700 units for 1955. Despite the poor sales of the Corvette at the time, the V8 was a popular option, with an estimated six cars produced with the inline-six.[14] Three new competitors, the Ford Thunderbird, the Studebaker Speedster, and the larger Chrysler C-300 were introduced that same year. 1956 Chevrolet Corvette transistorized "hybrid" (vacuum tubes and transistors) car radio option, which was GM's first start in using the modern solid-state electronics for a production car model A new body was introduced for the 1956 model featuring a revised front end and side coves; the taillamp fins were deleted.[19] An optional "Ramjet" fuel injection system was made available midway through the 1957 model year. It was one of the first American mass-produced engines in history to reach 1 horsepower per cubic inch (0.046 kW/cm3) and Chevrolet's advertising agency used a "one hp per cubic inch" slogan for advertising the 283 hp (211 kW; 287 PS) 283 cu in (4.64 L) Small-Block engine.[20] Other options included power windows (1956), hydraulically assisted convertible top (1956), heavy-duty brakes and suspension (1957), and four-speed manual transmission (late 1957).[20] Delco Radio transistorized signal-seeking "hybrid" car radio, which used both vacuum tubes and transistors in its radio's circuitry (1956 option). The 1958 Corvette received a body and interior revisions including a longer front end with quad headlamps, bumper exiting exhaust tips, revised steering wheel, and a dashboard with all gauges mounted directly in front of the driver.[23] For 1958 only were 1958 hood louvers and twin trunk spears.[23] The 195960 model years had few changes except a decreased amount of body chrome and more powerful engine offerings. In 1961, the rear of the car was completely redesigned with the addition of a tapered tail with four round lights. The light treatment would continue for all following model year Corvettes until 2014.[25] In 1962, the Chevrolet 283 cu in (4.64 L) Small-Block was enlarged to 327 cu in (5.36 L). In standard form it was rated at 250 hp (186 kW; 253 PS). For an additional 12% over list price, the fuel-injected version produced 360 hp (268 kW; 365 PS),[26] making it the fastest of the C1 generation. 1962 was also the last year for the wraparound windshield, solid rear axle, and convertible-only body style.[27] The trunk lid and exposed headlamps did not reappear for many decades. Second generation (C2; 19631967) The second generation (C2) Corvette, which introduced Sting Ray to the model, continued with fiberglass body panels, and overall, was smaller than the first generation. The car was designed by Larry Shinoda with major inspiration from a previous concept design called the "Q Corvette," which was created by Peter Brock and Chuck Pohlmann under the styling direction of Bill Mitchell.[29][30] Earlier, Mitchell had sponsored a car known as the "Mitchell Sting Ray" in 1959 because Chevrolet no longer participated in factory racing. This vehicle had the largest effect on the styling of this generation, although it had no top and did not give away what the final version of the C2 would look like.[31] The third inspiration was a mako shark Mitchell had caught while deep-sea fishing. Production started for the 1963 model year and ended in 1967. Introducing a new name, "Sting Ray", the 1963 model was the first year for a Corvette coupé and it featured a distinctive tapering rear deck (a feature that later reappeared on the 1971 "Boattail" Buick Riviera) with, for 1963 only, a split rear window. The Sting Ray featured hidden headlamps, non-functional hood vents, and an independent rear suspension.[33] Corvette chief engineer Zora Arkus-Duntov never liked the split rear window because it blocked rear vision, but Mitchell thought it to be a key part of the entire design. Maximum power for 1963 was 360 hp (268 kW; 365 PS) and was raised to 375 hp (280 kW; 380 PS) in 1964. Options included electronic ignition, the breakerless magnetic pulse-triggered Delcotronic first offered on some 1963 Pontiac models.[34] On 1964 models the decorative hood vents were eliminated and Duntov, the Corvette's chief engineer, got his way with the split rear window changed to a full-width window. Four-wheel disc brakes were introduced in 1965, as was a "big block" engine option: the 396 cu in (6.49 L) V8. Side exhaust pipes were also optionally available in 1965, and continued to be offered through 1967. The introduction of the 425 hp (317 kW; 431 PS) 396 cu in (6.49 L) big block in 1965 spelled the beginning of the end for the Rochester fuel injection system.[35] The 396 cu in (6.49 L) option cost US$292.70 while the fuel injected 327 cu in (5.36 L) engine cost US$538.00. Few could justify spending US$245.00 more for 50 hp (37 kW; 51 PS) less, even though FI could deliver over 20 mpg on the highway and would keep delivering fuel despite high G-loading in corners taken at racing speeds. Another 1963 and 1964 option was the Z06 competition package, which offered stiffer suspension, bigger, multi-segment lined brakes with finned drums, and more. Only a couple hundred coupes and a single convertible were factory-equipped this way in 1963. With only 771 fuel-injected cars built in 1965, Chevrolet discontinued the option at the end of the 1965 production, having introduced a less-expensive big block 396 engine rated at 425 hp in the middle of the production year and selling over 2,000 in just a few months. For 1966, Chevrolet introduced an even larger 427 cu in (7.00 L) Big Block version. Other options available on the C2 included the Wonderbar auto-tuning AM radio, AM-FM radio (mid-1963), air conditioning (late-1963), a telescopic steering wheel (1965), and headrests (1966). The Sting Ray's independent rear suspension was successfully adapted for the new-for-1965 Chevrolet Corvair, which solved the quirky handling problems of that unique rear-engine compact. 1967 was the final model year for the second generation. The 1967 model featured restyled fender vents, less ornamentation, and backup lamps - which were inboard in 1966 - became rectangular and centrally located. The first use of all four taillights in red started in 1961 and was continued thru the C2 line-up except for 1966. This feature returned for the 1967 model year and then continued on all Corvettes since. The 1967 model year had the first L88 engine option that was rated at 430 hp (321 kW; 436 PS), but unofficial estimates place the output at 560 hp (418 kW; 568 PS) or more.[37] Only twenty such engines were installed at the factory. From 1967 through 1969, the Holley triple two-barrel carburetor, or Tri-Power, was available on the 427 L89 (a $368 option, on top of the cost for the high-performance 427).[38] Despite these changes, sales slipped more than 15%, to 22,940 (8,504 coupes, off close to 15%, and 14,436 convertibles, down nearly 19%). Duntov came up with a lightweight version of the C2 in 1962. Concerned about Ford and what they were doing with the Shelby Cobra, GM planned to manufacture 100 to 125 Grand Sport Corvettes, but only five were actually built.[30] They were driven by historic drivers such as Roger Penske, A. J. Foyt, Jim Hall, and Dick Guldstrand among others. Those five cars (001005) are all held by private owners, and are among the most coveted and valuable Corvettes ever built.[40] 002 is exhibited in the Simeone Foundation Automotive Museum and is in running condition. Third generation (C3; 19681982) The third-generation Corvette, patterned after the Mako Shark II concept car, was introduced for the 1968 model year and was in production until 1982. C3 coupes featured the first use of T-top removable roof panels. It introduced monikers that were later revived, such as LT-1, ZR-1, Z07, and Collector Edition. In 1978, Corvette's 25th anniversary was celebrated with a two-tone Silver Anniversary Edition and an Indy Pace Car replica edition of the C3. This was also the first time that a Corvette was used as a Pace Car for the Indianapolis 500. Engines and chassis components were mostly carried over from the C2, but the body and interior were new. The 350 cu in (5.7 L) engine replaced the old 327 cu in (5.36 L) as the base engine in 1969, but power remained at 300 hp (224 kW; 304 PS). 1969 was the only year for a C3 to optionally offer either a factory-installed side exhaust or a normal rear exit with chrome tips. The all-aluminum big-block 427 cu in (7.00 L) ZL-1 engine was also new for 1969; the special racing engine was listed at 430 hp (321 kW; 436 PS), but was reported to produce 560 hp (418 kW; 568 PS) and accelerated a ZL-1 through the 14 mile (0.40 km) in 10.89 seconds. There was an extended production run for the 1969 model year due to a lengthy labor strike, which meant sales were down on the 1970 models, to 17,316.[44] 1970 small-block power peaked with the optional high compression, high-revving small-block LT-1 that produced 370 hp (276 kW; 375 PS). The 427 big-block was enlarged to 454 cu in (7.44 L) with a 390 hp (291 kW; 395 PS) rating. The ZR-1 special package was an option available on the 1970 through 1972 model years, and included the LT-1 engine combined with special racing equipment. Only 53 ZR-1's were built. In 1971, to accommodate regular low-lead fuel with lower anti-knock properties, the engine compression ratios were lowered which resulted in reduced power ratings. The power rating for the 350 cu in (5.7 L) L48 base engine decreased from 300 to 270 horsepower and the optional special high-performance LT1 engine decreased from 370 to 330 horsepower. The LS5 454 cu in (7.4 L) motor was carried over and produced 365 hp (272 kW; 370 PS). Offered in 71 only was the LS6 454 cu in (7.4 L) big-block featuring aluminum heads and delivering 425 hp (317 kW; 431 PS), the highest of the 1970-1972 series, and could be ordered with an automatic transmission. For the 1972 model year, GM moved to the SAE Net measurement which resulted in further reduced, but more realistic, power ratings than the previous SAE Gross standard.[46] Although the 1972 model's 350 cu in (5.7 L) horsepower was actually the same as that for the 1971 model year, the lower net horsepower numbers were used instead of gross horsepower. The L48 base engine rating fell to 200 hp (149 kW; 203 PS) SAE and the optional LT1 dropped to 270 hp (201 kW; 274 PS) SAE.[28] 1974 models had the last true dual exhaust system that was dropped on the 1975 models with the introduction of catalytic converters requiring the use of no-lead fuel. Engine power decreased with the base ZQ3 engine producing 165 hp (123 kW; 167 PS), the optional L82's output 205 hp (153 kW; 208 PS), while the 454 big-block engine was discontinued. Gradual power increases after 1975 peaked in 1980 with the model's optional L82 producing 230 hp (172 kW; 233 PS) in its final year.[24] 1981 saw a single engine, the L81, which had 190 hp (142 kW; 193 PS) while the fuel-injected 1982 L83 had 200 hp (149 kW; 203 PS). Styling changed subtly throughout the generation until 1978 for the car's 25th anniversary. The Sting Ray nameplate was not used on the 1968 model, but Chevrolet still referred to the Corvette as a Sting Ray; however, 1969 (through 1976) models used the "Stingray" name as one word, without the space.[49] In 1970, the body design was updated including fender flares, and interiors were refined, including redesigned seats and indication lights near the gear shift that were an early use of fiber optics. To comply with government safety regulations the 1973 Corvette's chrome front bumper was changed to a 5-mile-per-hour (8 km/h) system with a urethane bumper cover,[50] while the rear retained the two-piece chrome bumper set, its last year. The optional wire-spoked wheel covers (left) were offered for the last time in 1973. Only 45 Z07 were built in 1973. From 1974 onwards both the front and rear bumpers were polyurethane. In 1974, a 5-mile-per-hour (8 km/h) rear bumper system with a two-piece, tapering urethane bumper cover replaced the Kamm-tail and chrome bumper blades, and matched the new front design from the previous year. The 1975 model year ended the convertible body style until it returned 11 years later, and Dave McLellan succeeded Zora Arkus-Duntov as the Corvette's Chief Engineer.[51] For the 1976 models the fiberglass floor was replaced with steel panels to provide protection from the catalytic converter's high operating temperature. For 15 model years the names Corvette, Sting Ray, and Stingray were synonymous. 1977 was the last year the tunneled roof treatment with a vertical back window was used, in addition, leather seats were available at no additional cost for the first time. The black exterior color returned after a six-year absence. The 1978 25th Anniversary model introduced the fastback glass rear window and featured a new interior and dashboard. Corvette's 25th anniversary was celebrated with the Indy 500 Pace Car limited edition and a Silver Anniversary model featuring silver over gray lower body paint. All 1979 models featured the previous year's pace car seats and offered the front and rear spoilers as optional equipment.[29] 53,807 were produced for the model year, making 1979 the peak production year for all versions of the Corvette. Sales have trended downward since then.[53] In 1980, the Corvette received an integrated aerodynamic redesign that resulted in a significant reduction in drag. After several years of weight increases, 1980 Corvettes were lighter as engineers trimmed both body and chassis weight.[23] In mid-1981, production relocated from St. Louis, to Bowling Green, Kentucky (where all subsequent Corvette generations have since been manufactured),[citation needed] and several two-tone paint options were offered. The 1981 models were the last available with a manual transmission until well into the 1984 production run. In 1982, a fuel-injected engine returned, and a final C3 tribute Collectors Edition featured an exclusive, opening rear window hatch FREE scheduling, supersized images and templates. Get Vendio Sales Manager.Make your listings stand out with FREE Vendio custom templates! FREE scheduling, supersized images and templates. Get Vendio Sales Manager. Over 100,000,000 served. Get FREE counters from Vendio today!

Price: 19.96 USD

Location: San Diego, California

End Time: 2025-01-19T15:53:05.000Z

Shipping Cost: 0 USD