J-46904 Injector Nozzle/Cup/Sleeve Tube Remover Installers For Detroit 60 Series

Description: J-46904 Injector Nozzle/Cup/Sleeve Tube Remover Installers For Detroit 60 Series Feature: J-46904 for screw-in stainless cups 240-1039 23538840 240-1035 23533148 J-48824 for screw-in stainless cups 240-1045 23534745 23538829 J-33880 and ST-223 for brass cups 240-1028 240-1017 8929078 23501580 Developed to aid while Install & Remove Injector Cups on 2005 & 2007 Detroit Diesel 60 Series. Alternative to Kent-Moore J-46904 & J-48824 For 2005-2007 Detroit Diesel 60 Series Benefits: Help to do your work in a quick & accurate way. Save your time. Removing and installing EPA07: 1. Drain Engine Coolant before removing injector tube. 2. Injector tubes may be damaged if excessive force is used during removal. 3. Install injector cup removal/installation tool into injector bore. See pictures for correct tool. Aligning tool with slots in tube. Turn injector cup removal/installation tool and injector tube counter clockwise to remove. 4. Check injector tube for cracks or defects. Replace if damaged. 5. Paying careful attention not to score cylinder head to injector tube sealing surface, clean injector tube threads with fine wire brush. Pay strict attention to keep debris out of fuel supply line. 6. For cleaning injector tube interior sealing surface, a chemical solvent may be used. 7. Thoroughly clean injector bore, install new O’Ring with a silicone based lubricant into injector tube groove. 8. Use high temperature nickel based antiseize lubricant to coat injector tube threads. Install injector tube on injector cup removal/installation tool. 9. Using injector cup removal /installation tool install injector tube in injector bore. 10. Tighten injector tube to torque specs. (please refer to owners manual. 26-33 ftlb loosen 180 degrees tighten 26-33 ftlb.） 11. Tip of the injector must be flush with the fire deck or sunk into the cylinder head. Ensure tube does not protrude past fire deck into cylinder. 12. Re-install or replace shim. Ensure NEW shim is of same thickness as original one. To insure proper tube depth after fire deck has been milled a shim is used between tube and cylinder head in remanufactured cylinder heads. Note: Please refer to your service manual for most up to date procedure. Package Included: 1× J-46904 1× J-48824 ★. S&H will be determined based upon the SHIP TO address. ★. Please list your special requests (color, packages, etc.) in the NOTES SECTION when you make payment. ★.Items will be shipped within 1-3 business day when we received payment. ★.We only ship to confirmed ebay addresses. Your ebay address MUST MATCH your Shipping address. ★.We accept 60 days return guarantee for all Items If you are unsatisfied with something you bought from us, you may send it back within 60 days of receipt, and we shall be happy to exchange or refund. ★.Leave a message note in returned box quoting your item(s) ID and buyer ID. ★.All returned products must be in their original condition and packaging. Unfortunately, if products have been assembled or modified, we cannot take them as returns. ★.It is important that we know when your return is expected. Please save your return tracking number or post receipt, and email it to us. We need this in case there are any issues during transit. ★.Refund will only be issued upon our receipt of the returned parcel. Please allow 2 working days for us to process with your return. ★.Welcome to our store! We will reply your message within 24 hours Mon-Sat, and 48 hours on Sunday. ★.We maintain high standards of excellence 5-stars and strive for 100% customer satisfaction! PositiveFeedback is very important to us. ★.Pls contact us first before you leave Neutral or Negative feedback. We will do our best to solve the problem, thanks! ★.Any question,please don't hesitate to contact us by the ebay message.

Price: 34.14 USD

Location: Rancho Cucamonga, California

End Time: 2024-12-25T03:20:09.000Z

Shipping Cost: 0 USD