PS1 SCART/RGB Cable, Packapunch, CSYNC, RetroGamingCables, Brand New, USA Seller

Description: USA Seller. Item is in hand and will ship the day after payment is received via 2-3 day mail. 100% feedback, so bid with confidence. Brand new in factory sealed packaging. Made recently by Retrogamingcables in the UK. SCART/RGB cable for PS1, CSYNC. Cable is approximately 6 ft long and does not support Guncon. According to the manufacturer: Level up with a PACKAPUNCH PRO RGB SCART! This cable supplies an RGB video signal and stereo sound from your Sony Playstation 1 which is far superior than the original video cable. This cable is screened to minimize external interference and cable crosstalk between signals. This is achieved by using the PACKAPUNCH cable which has individually shielded wires for RED, GREEN, BLUE, SYNC, audio left and right and also the DC voltage line which is used for RGB selection on your video receiving equipment. Please note that this cable will not work in conjunction with a Hydra SCART switch. This cable is wired for CSYNC also known as composite sync, which has a built in video sync separator circuit and is powered directly by the Playstation console. Why upgrade to a PACKAPUNCH cable?: - Protects against external magnetic interference. - Protects against crosstalk between individual signals inside the cable. Why use CSYNC?: - For monitors which require CSYNC to function, like the Sony PVM 2950G, PVM 2950QM, NEC Multisync 4PG and XM29 plus. - When using Switching Extron Crosspoint Matrix Switcher. - If your a CSYNC FanBoy. - CSYNC will also work on most regular modern television sets. Features: - No Tuning required, just plug and play. - True RGB video & stereo sound. - Constructed from custom screened cable especially made for Retro Gaming Cables. - Wired for Composite Sync (CSYNC). New features - Fully wired/ grounded SCART plug using a custom Printed Circuit Board. - Composite Sync (CSYNC) signal achieved using a built in sync separator circuit - Custom ID label on SCART plug. - Quality Panasonic capacitors. Compatible with: - SCART enabled televisions. - SCART to HDMI converters. - SCART to component video converters. - XRGB-mini Framemeister via EuroSCART to mini adapter. - OSSC (Open Source Scan Converter). Frequently asked questions: Q. Is this PlayStation SCART cable compatible with all console regions? A. Yes, this cable works with all PlayStations 1 & 2 consoles released world wide, including PAL and NTSC versions. However we do supply separate cables for the PS1 and PS2, as the PS1 doesn't have the 200uF capacitors between the video encoder and the A/V output socket inside the console but the PS2 does, therefore, our PS1 cables have capacitors inside the SCART plug and our PS2 cables does not. This is to ensure maximum electrical compatibility for each console, Q. What is the CSYNC version for? A. Mainly for up-scalers like the Framemeister XRGB-mini and professional monitors, like the range of Sony PVM and BVM’s, but will work with regular SCART TV’s and SCART to HDMI up-scaling boxes. Q. Does the CSYNC version work with an external sync cleaner like the Sync Strike? A. The CSYNC version has a sync cleaner built into the SCART plug, and yes you can use this in series with a second sync cleaner, which you find in some SCART adapter cables like the EuroSCART to Mini adapter and EuroSCART to BNC adapter, and also the Sync Strike. Compatibility Console = Sony Playstation 1 and PS1 Slim Region = NTSC, PAL Country = All Countries. Video and audio format RGB video? = YES Sync type = Composite Sync/CSYNC (built in sync stripper) taken from luma pin. Audio type = Stereo Cable construction = Shielded? = Individually Shielded PACKAPUNCH cable. i.e. Each core inside the cable has its own shielding. Including the following; Red, Green, Blue, Sync, Audio Left, Audio Right and 5 volts line. And this is complemented by an overall foil shield. = Connector A = Sony AV Multi Port. Using our proprietary connector over moulding technology. With our RGC logo embedded on the top side of the connector. = Connector B = EuroSCART - With integrated Printed Circuit Board interface. Which has all the ground pins connected to the SCART plug. Cased in our custom made shroud with our RGC logo embedded either side. = Lead Length = 1.8m / 6ft Please see detailed pics. Item pictured is actual item up for sale. No international bidders. Item will only be shipped within the United States. Shipping will be free and item will be shipped using USPS shortly after payment is received. I take tremendous pride in my feedback. Please check my feedback and bid with confidence. No returns. All items are sold as is. Please feel free to email through eBay if you have any questions about this item, or any others I am selling this week. Please do your homework before purchasing. These are specially made cables. All sales are considered final, and please understand that I cannot accept returns due to incompatibility issues you may run in to with respect to your electronic equipment such as consoles, monitors, TV's, upscalers and splitters. Thanks again for viewing my auction, and best of luck bidding.

Price: 61.99 USD

Location: Clayton, North Carolina

End Time: 2024-11-25T21:18:31.000Z

Shipping Cost: 0 USD