Used AUTOOL Ultrasonic Fuel Injector Cleaner Tester Nozzles Cleaning Machine

Description: AUTOOL CT200 is an injector cleaner and tester machine that combines ultrasonic cleaning technology with oil pressure control cleaning and inspection technology. It can simulate various working conditions of the engine to clean and test the injectors. It can support 6-cylinder injectors at the same time, saving time, and efficiency. Also supports testing of fuel injectors for most cars and motorcycles in the market. Since its launch, AUTOOL CT200 model has been widely received and approved by professional auto repair technicians.Why Choose AUTOOL CT200 Automotive Injector Cleaner and Tester MachineThe CT 200 is an injector cleaner and tester machine that combines ultrasonic cleaning technology with oil pressure control cleaning and inspection technology. It can simulate various working conditions of the engine to clean and test the injectors. It can support 6-cylinder injectors at the same time, saving time, and efficiency. Also supports testing of fuel injectors for most cars and motorcycles in the market. Since its launch, AUTOOL CT200 model has been widely received and approved by professional auto repair technicians.Ultrasonic Cleaning It works by transmitting an ultrasonic vibration signal to the injector nozzles via a pulse signal line, which causes stubborn carbon deposits to shake strongly and remove them more thoroughly. It is worth mentioning that it can also clean up to 6 injectors at the same time, which greatly improves the cleaning efficiency.Reverse Cleaning & ON-Vehicle Cleaning No disassembly or cleaning is required: The unit comes with a variety of adapters for easy cleaning of the injectors on your vehicle. Flushing in the opposite direction: Reverse flushing is a method of cleaning an injector by testing the flow of the liquid from the injector outlet to the injector inlet. Removes dirt from the inside of the injector or injector filter in the reverse direction (for top injectors only)Widely Applicable AUTOOL CT200 Fuel Injector Cleaner & Tester is with English Panel. We can clean and test both petrol car and motorcycle injector with this machine. (fit for HONDA YAMAHA SUZUKI SANYANG only),Applicable Voltage: Applicable Voltage:Support 110V or 220V power inputFuel Injector TestInjector flow uniformity and sprayability test: This section is designed to ensure that the injector's spraying effect is uniform and the spraying performance is stable, thus ensuring full combustion of fuel and stability of power output. Leakage test: Through strict inspection of the injectors for leakage to ensure good sealing performance and prevent performance degradation or safety hazards caused by leakage. Injection Flow Test: This test is used to accurately measure the amount of fuel injected by the injector to ensure that the engine is supplied with the right amount of fuel under different operating conditions.Supports 4 / 6 cylinder operationAThe AUTOOL CT200 Injector Cleaning Tester, a highly efficient 6-cylinder injector cleaning machine, is capable of cleaning and testing six injectors at the same time. However, its adaptability goes far beyond that, as it is also perfectly suited for 4 and 8 cylinder engines. When you apply it to 4-cylinder engines, please plug the two connectors inside the machine to ensure precise and safe operation. If you are working on an 8-cylinder engine, it is recommended that you divide the injectors into two groups of four and perform two cleaning tests each to ensure that each injector is thoroughly cleaned and tested.Package Includes: 1pc * AUTOOL CT200 Fuel Injector Cleaner Tester Main Unit; 1pc * Ultrasonic Cleaning Bracket 2pc * Drain Valves 2pc * Fixing rods 2pc * Fixing Nuts 6pc* Reverse flush connectors 6pc * Conical top inlet connectors 6pc* Special injector gaskets 5pc * Special plugs for oil separator 5pc * Special injector seals 1pc * Ultrasonic Cleaning Cover 1pc * Power Cable 6pc *Adapter cables 1pc * Oil Separator 1pc * User ManualAUTOOL CT200 New DesignPressure gauge It is used to display the output pressure of the injector during the test, and to control the test fluid output state of the injector by adjusting the pressure value.Level gauge To observe the volume of test fluid, be careful not to add more than the maximum amount to avoid damage to the machine or syringe due to excessive pressure.Recovery valves The cleaning and testing fluids are recycled through the valve and can be reused, saving you money and avoiding damage to the product caused by liquids left in the tank for long periods of time.How does it work? 1. Add the cleaning solution and place the syringe into the ultrasonic cleaning bath. Select item 1 Ultrasonic Cleaning Function.2 Add the test fluid, then install the injector on the fuel distributor and select a different function to testHow do I choose a cleaning solution?We recommend that you use a specialized syringe cleaner that is readily available at your local supermarket. It is usually very corrosive and flammable and should be used away from sources of ignition and avoided in contact with skin!How do I choose a test fluid?We recommend using a specialized automotive injector test fluid. If this is not available locally, industrial alcohol with an alcohol content of more than 75% can be used instead (usually the test fluid is a colorless, clear, non-irritating odor liquid). Please note the information regarding test fluids and cleaners： 1. Prohibit the use of corrosive liquids as injector testing fluids. It is prohibited to add corrosive liquid directly into the glass test tube, which will damage the machine seals and injectors. 2. It is prohibited to use cleaning agent instead of test fluid, because the cleaning agent is corrosive, which will cause damage to the equipment and injector seals. 3. Prohibit the use of petrol instead of cleaning agent or test fluid, which is dangerous and can easily cause safety hazards. 4. It is forbidden to confuse the two liquids, cleaning agent or test liquid, in which the cleaning liquid is corrosive and can easily damage the machine seals. 5. Please put the cleaning liquid in the ultrasonic box for engine carbon cleaning. Put the test liquid or industrial alcohol into the glass tube for syringe test.MORE PRODUCTSMORE PRODUCTSMORE PRODUCTS 3 YEARS WARRANTY Delivery DetailsMORE PRODUCTS MORE PRODUCTS MORE PRODUCTS 3 YEARS WARRANTY Delivery Details

Price: 339 USD

Location: Bordentown, New Jersey

End Time: 2025-02-12T02:16:07.000Z

Shipping Cost: 0 USD